Case Studies

The NcNeil's home in Asheboro, NC had a crawlspace with some moisture issues which caused the insulation to fall and the floor joists to rot. This then caused the kitchen floor to sink/sag and some cracking in the upstairs walls....

Customer has a partially finished basement and wanted to turn the other half into a functional living space. She was also concerned about mold and humidity in the basement if she was going to renovate the space. She wanted a cost efficient way to control the humidity and transform the...

Homeowners are retired and have lived in their 3-story mountain home for 8 years. With the rising health concerns about radon, the homeowner's decided to have their home tested. To their dismay, they had a positive reading at 10 pCi/L. The homeowners wanted the mold and radon vapors in their...

Homeowner has an outdated leaky basement. Dampness behind the wall panels was an obvious sign of water intrusion in the basement. They needed to waterproof the basement so that they can use it as a studio office and bonus room. In addtion, they wanted to update the look of the...

Customer had two (2) separate crawlspaces below home; one measuring 350 sq. ft. and the other measuring 950 sq. ft. Homeowners were completely renovating their home and wanted to encapsulate both crawlspaces. They were hoping to make their home more energy efficient and turn their crawlspaces into a usable area....

The BeCraft’s have lived in their Abington home, built in 1999, for close to 10 years. Over the years, they began to notice their hardwood floors begin to severely sag in the center and the molding separate from the floor and ceiling.  The footers of the original concrete piers had...